User Settings
The USER SETTINGS can change the way information is displayed on the thermostat and help
to optimize comfort. It’s one way to truly personalize your new thermostat.
To get to the USER SETTINGS, press the MENU button from the main screen.
USER SETTINGS are below the FAN settings. Use the DOWN button to scroll below the
screen. Press SELECT.
Choose the setting you would like to change. When the SETTING is highlighted, press SELECT. There are 13 USER
SETTINGS in all as listed below. For detailed information on each user setting, please go to the next page.
17
78.1
Setting the Economizer / Damper Program
The thermostat can be set to open or close a damper or economizer at different times during the day. To
program this setting, select FRESH AIR from the main menu and press SELECT.
Select PROGRAM. Press SELECT.
Programming is just like the temperature program. The
time of the events is determined from the setting in the
TEMPERATURE PROGRAM MENU.
Using the UP or DOWN
arrow, select OPEN or
CLOSED for each event.
Setting the Purge Cycle
During periods when the facility may be unoccupied, the thermostat can open the damper or economizer
to bring in fresh air for short periods of time. To set, simply select PURGE CYCLE from the FRESH AIR
MENU and press SELECT.
Using the UP and DOWN buttons, change the desired open time and close time for the damper.
To disable this function, set the OPEN TIME to 0. The word OFF will appear.
NOTE: This function will operate only when the damper is closed during an event.
16
Comments to this Manuals